TRAINING AND EDUCATION
BLUMANO conducts various courses on stage machinery safety based upon relevant legislation, applicable standards and good practices for professionals in the entertainment industry.
By providing online sessions, we offer the convenience and flexibility of bringing educational content to you wherever you are. Our established schedules cover most time zones so our classes can fit into your timetable.
Our private training courses include
Stage Machinery Risk Assessment
This course is designed to provide stage machinery designers, system integrators and the operators working in the entertainment industry with an in-depth understanding of the risk analysis process and the fundamental steps needed to carry out a risk assessment. Check here for info on ORA (Online Risk Assessment).
EN 17206 – Upper Machinery: Lifting
This EN 17206 – Upper Machinery: Lifting classroom is designed to provide stage machinery designers, system integrators and operators with an in-depth understanding of the specifications and requirements related to Upper Machinery: Lifting in the entertainment industry.
Validations, CE Compliance, Approval and Certification
This classroom is designed to teach the differences between validations, CE compliance, approvals and certification in regard to stage machinery. You will learn what each one is, what’s required and what you can/can’t do. The course will explore how validations and approvals can concur to support the procedure, which process needs to be carried out and what documentation is normally produced.
Keep the CE Mark After Maintenance or Modifications
This Substantial Modifications class provides maintenance and repair technicians and system integrators with an in-depth understanding of when adding machinery to an assembly of machinery, modifications of existing CE or non-CE marked machinery or the alteration of machinery before putting it into service should be regarded and assessed.
D8/D8 Plus Chain Hoist vs EN 17206 UC1-UC2 Machinery
The Electric Chain Hoist classroom is designed to provide stage machinery designers, system integrators and operators with an in-depth understanding of intended use, compliance frameworks, the similarities and differences and the requirements/allowances that are related to electric chain hoists used in the event industry to keep suspended loads without people being in the hazard zone.
Who’s Responsible for the Machinery Installation?
This classroom is designed to provide stage machinery designers, system integrators, installers and operators with an in-depth understanding of the responsibility and liability framework related to stage machinery installations. It covers equipment ownership, machinery interferences, safety-related interfaces, handover procedures, test reports, periodic inspections and more.
Stage Machinery Risk Assessment
This course is designed to provide stage machinery designers, system integrators and the operators working in the entertainment industry with an in-depth understanding of the risk analysis process and the fundamental steps needed to carry out a risk assessment. Check here for info on ORA (Online Risk Assessment).
EN 17206 – Upper Machinery: Lifting
This EN 17206 – Upper Machinery: Lifting classroom is designed to provide stage machinery designers, system integrators and operators with an in-depth understanding of the specifications and requirements related to Upper Machinery: Lifting in the entertainment industry.
Validations, CE Compliance, Approval and Certification
This classroom is designed to teach the differences between validations, CE compliance, approvals and certification in regard to stage machinery. You will learn what each one is, what’s required and what you can/can’t do. The course will explore how validations and approvals can concur to support the procedure, which process needs to be carried out and what documentation is normally produced.
Keep the CE Mark After Maintenance or Modifications
This Substantial Modifications class provides maintenance and repair technicians and system integrators with an in-depth understanding of when adding machinery to an assembly of machinery, modifications of existing CE or non-CE marked machinery or the alteration of machinery before putting it into service should be regarded and assessed.
D8/D8 Plus Chain Hoist vs EN 17206 UC1-UC2 Machinery
The Electric Chain Hoist classroom is designed to provide stage machinery designers, system integrators and operators with an in-depth understanding of intended use, compliance frameworks, the similarities and differences and the requirements/allowances that are related to electric chain hoists used in the event industry to keep suspended loads without people being in the hazard zone.
Who’s Responsible for the Machinery Installation?
This classroom is designed to provide stage machinery designers, system integrators, installers and operators with an in-depth understanding of the responsibility and liability framework related to stage machinery installations. It covers equipment ownership, machinery interferences, safety-related interfaces, handover procedures, test reports, periodic inspections and more.
